Mysora Spotted Lantern Fly Tree Trap 36 Rolls, 30 ft Each — Adhesive Waterproof Tree Trunk Wraps

Mysora 36 Rolls Spotted Lantern Fly Tree Trap are adhesive tree trunk wraps—36 paper rolls, ~30 feet each—that you cut to size and wrap around trunks to create a sticky, weather-resistant barrier for outdoor pest control.

These tree trunk wraps are a simple, low-tech way to intercept crawling insects on trees. Each roll is made from sturdy paper with a thickened adhesive layer and a waterproof backing so it lasts outdoors through changing weather. The product ships as 36 separate rolls, giving you ample length to protect multiple trees, fruit-bearing trunks, or garden specimens throughout the season.

How do I put the tree trap on my trees?

Installation is straightforward: measure the trunk circumference, cut a piece from a roll, and wrap it around the tree at the chosen height. Press the adhesive down firmly and smooth any gaps—no additional tools are required beyond scissors. Replace or refresh wraps as needed when adhesive fills with debris.

• Measure trunk circumference and add overlap for secure fit
• Cut to length from a 30 ft roll using scissors or a utility knife
• Wrap at the height tall enough to intercept target pests
• Smooth adhesive and check periodically for wear or debris buildup

What are the material and durability features?

The wraps are manufactured from a paper substrate combined with a thick adhesive layer and a waterproof backing. This construction balances tackiness with outdoor resistance so the product holds up through damp weather. Because the base is paper, expect routine replacement when adhesive is saturated or torn.

• Paper base with reinforced adhesive layer for strong stickiness
• Waterproof backing protects adhesive from light moisture and rain
• Designed for outdoor seasonal use; replace when worn

How many trees can I protect with 36 rolls?

With thirty feet per roll and 36 rolls in the pack, you have extensive coverage for a small orchard, backyard, or multiple landscape trees. The exact number of trees protected depends on trunk sizes and how much overlap you leave when wrapping. This bulk set is optimized for property owners, landscapers, or community plantings who need multiple barriers.

• 36 rolls × ~30 feet per roll for large total linear coverage
• Smaller trunks require fewer inches per tree, larger trunks need more
• Plan overlaps to avoid gaps and allow secure adhesion

Can I use these wraps in different outdoor settings?

Yes—the product is designed for general outdoor tree protection across home gardens, orchards, and wooded edges. The wraps function as a physical barrier on trunks and are useful where you need a temporary perimeter against crawling pests. Avoid prolonged exposure to extreme conditions beyond typical seasonal weather.

• Suitable for backyard fruit trees and ornamental trees
• Works on trunks in gardens, small orchards, and landscape plantings
• Easily removed and replaced each season or after heavy wear

Who is this for? Gardeners, small-scale orchard owners, landscapers, and anyone managing multiple trees who wants an easy-to-install, replaceable adhesive trunk barrier will benefit from the Mysora 36-roll pack. It offers bulk coverage for routine seasonal protection where a physical sticky barrier is appropriate; choose this set when you need straightforward installation, ample length, and a weather-ready adhesive backing without specialized tools.

Notes: Manual measurement tolerance applies to roll length; colors may vary slightly by display. Dispose of used strips responsibly according to local waste guidelines.